Showing 73–77 of 77 results

Tsop 38 Mhz Ir Receiver Pcb Remote Control Sensor Module Microcontroller

249.00
TSOP1838 or VS1838 is a miniaturized receivers for infrared remote control systems. PIN diode and pre-amplifier are assembled on lead

Usb Cable For Arduino Uno (Blue)

399.00
Exclusively designed for Arduino boards. Allows you to connect Arduino Nano V3 with Mini USB port to the computer Convenient

W1209 50~100 Digital Temperature Controller Thermostat

399.00
Connect the power supply and the load, you can supply to the controller,Is displayed as a measured temperature,Press the SET

White Color Heat Sink Paste Cooling Compound Thermal Conductive Silicone Sealant Mt-1302b

365.00
High Thermal Conductivity, Low Bleed and Stable at High Temperature Net Weight 100ML Thermal Grease Paste Compound Silicone for CPU

Wireless Transceiver Module NRF24L01+ 2.4GHZ – for Arduino MCU/ARM/PIC/AVR/STM32

399.00
wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! This module can achieve a good balance between wireless transition performance and cost!Only require an external inductor in the antenna matching There is no need multi-layer PCB. 5V tolerance level inputs. Improved ShockBurst and the serial interface can be easy to connect with a variety of low-cost MCU. There si no need SPI interface with the MCU. Received in the rate of 2Mbit/s, the peak current is 12.5mA.You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! 2Mbit/s, 1Mbit/s, 250Kbit/s, three selectable transmission rate. MultiCeiver hardware and six receiver functions. 2 Mbit/s make high-quality VoIP is possible. +/- 60 ppm crystal.When the rate of 2Mbit/s @ 0dBm output,the peak current is 11mA. Power-down mode, power consumption is 400nA. Standby mode, power consumption is 32uA. 130us fast switching and wake time.With voltage regulator:Oltage regulators on board. Built-in